GEPRC CineLog35 V2 HD O3 FPV Drone (ELRS 2.4G)

Specifications

Model: Cinelog35 V2 HD O3
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal plate: 2.0mm
Top plate: 3.5mm
Bottom plate: 1.5mm
FC system:GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: O3 Air Unit
Camera: O3
Antenna: 5.8G&2.4G
Motor: SPEEDX2 2105.5-2150KV（6S）
Propeller: HQProp D-T90MM
CineLog35 V2 HD O3 TBSNanoRX weight: 285.8g
Receiver: PNP, GEPRC ELRS 2.4G, TBS Nano RX
Recommended battery: LiPo 1050mah-1300mah
Flight time: 5′00″ -8′ 30″

Includes

1 x Cinelog35 V2 HD O3
2 x HQProp D-T90MM（2 pairs）
2x M20*250mm battery strap
2 x Battery Silicone Pads
1 x Set of screws
1 x L-shaped screwdriver (1.5mm)
1 x L-shaped screwdriver (2mm)
1 x L-shaped screwdriver (3mm)
1 x M5 wrench
1 x plastic tweezers
1 x Antenna fixed tube (pair)
1 x Keychain
1 x GoPro Mounting Base
1 x Naked GoPro Mounting Base
1 x Antenna Mounting Base
Screw package includes:

2x cup head screws M2*18
2x round head screws with pad M2*5.5
1x round head screws M2*12
2x Rivet nut M2
4x round head screws M2*8
4x round head screws M2*7
4x round head screws M2*6
2x round head screws M2.5*6
2x hexagonal screw M1.6*8
1x Flange nuts M5
2x Press Rivet Nuts_Brass color M2*1.9-OD4.9
2x Iron nut M2
2x Iron nut M2
2x Camera gimbal shock absorbing rubber

Technical Details